China High Efficiency K Series Helical Bevel Gearbox Speed Reducer Industrial Gearboxes helical bevel gearbox efficiency

Solution Description

Substantial Efficiency K Collection Helical Bevel Gearbox Velocity Reducer Industrial Gearboxes

Product Description


Description: K Sequence Helical Bevel Gearbox

Overview
(1) Input manner: coupled motor, belted motor, input shaft or link flange.
(2) Correct angle output.
(3) Compact framework.
(4) Rigid tooth confront.
(5) Carrying increased torque, higher loading capability.
(6) Large precision gear, ensuring the unit to function stably, sleek transmission.
(7) Low sound, lengthy lifespan.
(8) Big overlap coefficient, abrasion resistant.

Comprehensive Photos

K series gear units are offered in the following styles:
KAZ..Y..Quick-flange-mounted helical-bevel gear models with hollow shaft
K…Y…Foot-mounted helical-bevel equipment models with sound shaft
KAT…Y…Torque-arm-mounted helical-bevel gear models with hollow shaft
KAB…Y…Foot-mounted helical-bevel equipment models with hollow shaft
K(KF,KA,KAF,KAB,KAZ)S…Shaft enter helical-bevel gear units
KA…Y…Helical-bevel equipment units with hollow shaft
KA(K, KF ,KAF, KAB ,KAZ)R..Y..Combinatorial helical-bevel equipment units
KF…Y…Flange-mounted helical-bevel equipment models with sound shaft
KA(K, KF ,KAF ,KAZ)S…R…Shaft enter combinatorial helical-bevel gear units
KAF…Y…Flange-mounted helical-bevel gear models with hollow shaft
KA(K, KF ,KAF, KAB ,KAZ)…Y…When equipping the user’s motor or the particular 1 ,the flange is required to be linked

The weights are suggest values, only for reference.
Highest torque implies the largest 1 of the greatest torque associated to the various ratio for the specified dimension.

Rated Power:.18KW~200KW
Rated Torque:Up to 50000N.m
Gear Arrangement:Bevel Helical Hardened Gearbox
Enter Pace:50HZ or 60HZ of 4Pole,6Pole and 8pole motor
Ratio:5.36~192.eighteen

Item Parameters

Construction:

K(-)
 
K(A) K(F) Input power range Output speed Output torque
Foot-mounted Hollow shaft 
output
Flange-mounted .eighteen-200kw .1-270r/min Up to 50000Nm

Input power score and highest torque:

Size
 
38 forty eight fifty eight 68 seventy eight 88 ninety eight 108 128 158 168 188
Structure
 
K      KA           KF          KAF        KAZ          KAT           KAB                        
Enter electrical power score(kw)
 
.18~
three.
.eighteen~
3.
.18~
5.5
.18~
five.5
.37~
11
.seventy five~
22
1.3~
30
3~
forty five
7.5~
90
11~
160
11~
two hundred
18.5~
two hundred
Ratio five.36~
106.38
five.81~
131.87
6.57~
one hundred forty five.15
7.fourteen~
forty four.seventy nine
7.22~
192.eighteen
7.19~
197.27
eight.ninety five~
one hundred seventy five.forty seven
8.74~
141.ninety three
8.sixty eight~
146.07
twelve.sixty six~
one hundred fifty.03
17.35~one
sixty four.44
17.ninety seven~
178.37
Highest
Torque(N.m)
 
200 400 600 820 1550 2770 4300 8000 13000 18000 32000 50000

Equipment device weight:

Size
 
38 48 58 68 78 88 ninety eight 108 128 158 168 188
Excess weight
 
11 20 27 33 57 85 one hundred thirty 250 380 610 1015 1700

 

Packaging & Shipping

Firm Profile

After Revenue Services

Pre-sale services 1. Decide on gear model.
2.Design and manufacture products in accordance to clients’ special need.
3.Prepare technological private for clientele
Services in the course of promoting 1.Pre-check and settle for goods ahead of shipping and delivery.
2. Assist customers to draft fixing ideas.
After-sale companies 1.Support clientele to put together for the first building scheme.
two. Train the very first-line operators.
3.Get initiative to eradicate the difficulty rapidly.
four. Provide complex exchanging.

FAQ

one. How to select a gearbox which fulfills our necessity?
You can refer to our catalogue to decide on the gearbox or we can help to select when you give
the technological information of essential output torque, output pace and motor parameter and many others.
two. What details shall we give prior to placing a acquire buy?
a) Variety of the gearbox, ratio, input and output kind, input flange, mounting placement, and motor details etc.
b) Housing shade.
c) Purchase amount.
d) Other particular specifications.
3. What industries are your gearboxes being utilised?
Our gearboxes are commonly used in the regions of textile, meals processing, beverage, chemical industry,
escalator,automatic storage gear, metallurgy, environmental security, logistics and and many others.
4.Do you supply any visiting?
Of course! We sincerely invite you to visit us! We can choose you from airport, railway station and so on. Also, we can prepare housing for you. Remember to allow us know in sophisticated.
five.Is your top quality excellent?
Top quality in no way inform lies, we’re theprofessional manufacturer and exporter of gear reducer and motor in Asia, who has been offered license given that 1982. Also, we experienced achieved ISO9001 and CE Certification between all manufacturers.

 

Make contact with:

If you are intrigued in our product, welcome you get in touch with me.
Our group will assistance any need to have you may possibly have.

US $70-2,000
/ Piece
|
1 Piece

(Min. Order)

###

Application: Motor, Machinery
Function: Change Drive Torque, Speed Changing, Speed Reduction
Layout: Right Angle
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Four-Step

###

Samples:
US$ 20/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

K(-)
 
K(A) K(F) Input power range Output speed Output torque
Foot-mounted Hollow shaft 
output
Flange-mounted 0.18-200kw 0.1-270r/min Up to 50000Nm

###

Size
 
38 48 58 68 78 88 98 108 128 158 168 188
Structure
 
K      KA           KF          KAF        KAZ          KAT           KAB                        
Input power rating(kw)
 
0.18~
3.0
0.18~
3.0
0.18~
5.5
0.18~
5.5
0.37~
11
0.75~
22
1.3~
30
3~
45
7.5~
90
11~
160
11~
200
18.5~
200
Ratio 5.36~
106.38
5.81~
131.87
6.57~
145.15
7.14~
44.79
7.22~
192.18
7.19~
197.27
8.95~
175.47
8.74~
141.93
8.68~
146.07
12.66~
150.03
17.35~1
64.44
17.97~
178.37
Maximum
Torque(N.m)
 
200 400 600 820 1550 2770 4300 8000 13000 18000 32000 50000

###

Size
 
38 48 58 68 78 88 98 108 128 158 168 188
Weight
 
11 20 27 33 57 85 130 250 380 610 1015 1700

###

Pre-sale services 1. Select equipment model.
2.Design and manufacture products according to clients’ special requirement.
3.Train technical personal for clients
Services during selling 1.Pre-check and accept products ahead of delivery.
2. Help clients to draft solving plans.
After-sale services 1.Assist clients to prepare for the first construction scheme.
2. Train the first-line operators.
3.Take initiative to eliminate the trouble rapidly.
4. Provide technical exchanging.
US $70-2,000
/ Piece
|
1 Piece

(Min. Order)

###

Application: Motor, Machinery
Function: Change Drive Torque, Speed Changing, Speed Reduction
Layout: Right Angle
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Four-Step

###

Samples:
US$ 20/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

K(-)
 
K(A) K(F) Input power range Output speed Output torque
Foot-mounted Hollow shaft 
output
Flange-mounted 0.18-200kw 0.1-270r/min Up to 50000Nm

###

Size
 
38 48 58 68 78 88 98 108 128 158 168 188
Structure
 
K      KA           KF          KAF        KAZ          KAT           KAB                        
Input power rating(kw)
 
0.18~
3.0
0.18~
3.0
0.18~
5.5
0.18~
5.5
0.37~
11
0.75~
22
1.3~
30
3~
45
7.5~
90
11~
160
11~
200
18.5~
200
Ratio 5.36~
106.38
5.81~
131.87
6.57~
145.15
7.14~
44.79
7.22~
192.18
7.19~
197.27
8.95~
175.47
8.74~
141.93
8.68~
146.07
12.66~
150.03
17.35~1
64.44
17.97~
178.37
Maximum
Torque(N.m)
 
200 400 600 820 1550 2770 4300 8000 13000 18000 32000 50000

###

Size
 
38 48 58 68 78 88 98 108 128 158 168 188
Weight
 
11 20 27 33 57 85 130 250 380 610 1015 1700

###

Pre-sale services 1. Select equipment model.
2.Design and manufacture products according to clients’ special requirement.
3.Train technical personal for clients
Services during selling 1.Pre-check and accept products ahead of delivery.
2. Help clients to draft solving plans.
After-sale services 1.Assist clients to prepare for the first construction scheme.
2. Train the first-line operators.
3.Take initiative to eliminate the trouble rapidly.
4. Provide technical exchanging.

How to Design a Helical Gearbox

Basically, a gear is a rotating circular machine part that has teeth cut into it to transmit torque or speed. Gears operate on a similar principle to levers. However, gears are usually asymmetrical in nature, and they have meshing teeth that work together to transmit torque or speed.helical gearbox

Helix angle

Whether you’re looking for a right angle gearbox or a helical gearbox, the angle of the teeth is an important consideration. It affects contact ratios, radial force and the torque capacity of the gear.
A helical gearbox uses the same basic elements as a spur gear, except it has teeth that are closer together. It is also more suited for high-load applications. It is also quieter than conventional gears. The main differences between a helical gearbox and a spur gear are its pitch and the helix angle.
The pitch of a helical gear is measured in the plane perpendicular to the direction of the teeth. It may also be called circular pitch. The pitch of a helical gear may be greater or less than circular pitch.
The normal pitch of a helical gear is also measured in the plane perpendicular to its direction of rotation. It is often called the reference value.
Unlike the spur gear, a helical gear does not have a unique optimum pressure angle. A helical gear’s contact ratio will decrease as the pressure angle increases. This is due to the fact that the length of the contact line decreases.
The pitch of a helical planetary gearbox can be calculated by dividing the total helix angle of the pinion and gear by the sum of their normal pressure angles. The helix angle is usually between 15 and 30 degrees.

Center distance

During the design of a helical gearbox, the center distance between the gears is a crucial input parameter. The center distance should be accurately calculated and modified based on the actual usage conditions. Undersized center distances cause a gear to mesh at a point other than the pitch point, which can lead to increased noise, premature wear and amplitude modulated vibrations.
The best way to calculate a helical gear’s center distance is to calculate the helix angle. This is often referred to as the fundamental rule of gearing. The helix angle is a mathematical expression that defines the relationship between the transverse and normal planes of the gear tooth. The pitch circle diameter increases with helix angle.
The number of teeth in a gear is also a relevant input parameter. There are a number of considerations to consider for determining the helix angle, such as the tooth depth, the pitch diameter, the number of teeth, and the radii of the index circle. The tooth depth is a useful way to calculate bottom clearance.
During the design of a helical mesh, the radial and axial thrust forces are produced. The angular backlash of a gear may vary depending on the type of gear, the pitch diameter and the transmission ratio. The total length of contact lines varies more gradually with the helix angle.
The number of cross sections in a helical mesh is also important. The radial module form is more economic to manufacture. The helical gearbox can be produced by using the same tooth cutting tools as spur gears.

Backlash

Having a smooth rotation of meshing gears is important. However, backlash is an issue that needs to be addressed. There are several ways of controlling backlash. The amount of backlash required depends on the application, size, and accuracy of the gears.
There are two basic ways of reducing backlash. The first is to decrease the distance between the gear centers. The second is to use spring loaded gears. The latter works better in low torque unidirectional drives.
The difference between the distances is called the transverse contact ratio. The longer the distance, the more rotational motion is required. The angular backlash is the opposite of the radial backlash.
The backlash may also be measured in terms of the angular distance between two gears. This measurement can be converted into an angular value at the operating pitch circle. A worm gear is another example.
Using the correct backlash calculator can determine the correct amount of backlash for your helical gearbox. The amount of backlash depends on the accuracy of the individual gears and the type of gearbox.
The gearbox also has components like pulleys, bearings, and wheels. There are several ways of reducing backlash, including the use of bolts and shims to decrease the center distance between gears. In heavy duty applications, a rigid bolted assembly is common.
To calculate the backlash of a geartrain, one must know the gear ratio of each gear in the train and how much it is mated to the reference shaft. This information is especially helpful for cumulative backlash.helical gearbox

Durability

Optimal design, materials, manufacturing, and maintenance procedures affect the lifecycle of a gear. This includes production, repair and replacement costs. The optimum maintenance schedule must also account for lifecycle costs.
The life of a gear can be extended by proper tooth tip relief. This will reduce wear, improve meshing, and increase the longevity of your gear.
The helical gearbox is a specialized type of gearbox, which transforms power from one right angle axis to another. Typical applications include automotive transmissions. It is a popular choice in applications with high speed, high load, or non-parallel shafts. It is quieter and smoother than spur gears. The modular production method used in helical gearboxes provides the best possible standard for component integrity and performance.
One of the most important components of a helical gearbox is the thrust bearings. These support the thrust forces created by the gears and can absorb some of them. A helical gearbox is best suited for high load applications that require a smooth gearing motion.
A good helical gearbox is one that is manufactured with bearings that can handle axial loading. A helical gearbox with a central gulley is often needed for tool clearance. The helix angle also has a bearing on its durability.
The helix angle is also the source of the largest thrust force produced by a helical gear. This large thrust force is produced by a series of special angle cut teeth. This may be one of the reasons why helical gears have been used in high speed applications.

Noise

Generally speaking, helical gears are considered to be a relative quieter gear than spur gears. It is estimated that a helical gear set with axial contact ratio of 2 is about 19 dB quieter than a spur gear set with the same contact ratio.
The term “whine” is often used to describe the tonal character of gear noise. This is a function of the dynamic forces that act on the gear mesh. The dynamic forces are related to rotational speed.
There are two main types of gear noise: the gear-specific noise and peripheral component noise. Both of these types can be caused by high-speed gears transmitting the power of an engine.
The gear-specific noise may be related to the number of teeth in contact. A low contact ratio can slow down the rotational speed of the driven gear. However, a high contact ratio will not reduce the transmission error. This is why it is important to prioritize your design intent before attempting any noise reduction measures.
The tonal character of gear noise can be determined by collecting and analyzing data over a period of time. This may include a series of tests at loads within the desired load range. This measurement can serve as a starting point for a gearbox’s root cause analysis.
The gear-specific noise has a number of mechanisms. These include the aforementioned transmission error signal and the gear-specific whine.helical gearbox

Applications

Various industries like plastics, printing, cement and other heavy industrial settings use helical gearboxes. Their advantages include low power consumption, quieter operation and high load application. However, there are some limitations. For example, heat generated by sliding contact is a hindrance to efficiency. It should also be noted that gear weight affects the performance of the gear.
There are two ways to mesh helical gears. The first method is to place the shafts oriented at a certain angle of helix, in a mesh. The second method is to place the shafts oriented in a different angle of helix. The difference in angle is referred to as the helix angle.
The helical gearbox is the most widely used gearbox. It is compact in size and works at a high efficiency. It is useful for driving conveyors, coolers and machines. It is also used in automation control systems.
Helical gears are often chosen over spur gears for non-parallel shafts. They are also used in gearboxes for automotive applications and in elevators. They also reduce vibrations.
The gears are made of special teeth that are angled to an axis. They are also cut at an angle. This allows for perpendicular meshing. They can be divided into two basic categories: crossed axis gears and single helical gears. Single helical gears can be right-handed or left-handed. Crossed axis gears are usually used to connect parallel shafts.
China High Efficiency K Series Helical Bevel Gearbox Speed Reducer Industrial Gearboxes     helical bevel gearbox efficiencyChina High Efficiency K Series Helical Bevel Gearbox Speed Reducer Industrial Gearboxes     helical bevel gearbox efficiency
editor by czh 2023-01-26

Helical Gear

As one of the leading helical gear manufacturers, suppliers, and exporters of mechanical products, We offer helical gear and many other products.

Please get in touch with us for details.

Manufacturer supplier exporter of helical gear.

Recent Posts